![]() |
|
#1
|
||||
|
||||
![]()
disconected each in turn, nothing. Did a compression check, well mate did, i think he said 137 psi on all four, cleaned the afm again, cleaned all plugs leads etc, changed fuel filter, swoped the air filter, cleaned batt terminals, flushed the coolant, checked oil level, checked al vacum lines, cleaned the tb out. And stil nothing. Then went and ripped the exhaust off on his drive! Dammit! Begging 2 hate this car!
|
#2
|
||||
|
||||
![]()
i found a spare pump.try cleaning the iaa unit and the cold start up as well, can't hurt anything.
__________________
![]() |
#3
|
||||
|
||||
![]()
stupid question, but where are they on the engine?
|
#4
|
||||
|
||||
![]()
on the front of the inlet manifold.
__________________
![]() |
#5
|
||||
|
||||
![]()
i no where u mean! Ok wil try and clean it out.
|
#6
|
||||
|
||||
![]()
but surely wouldnt alter the running, only idling.
|
#7
|
||||
|
||||
![]()
its fixed! Well sort of, today had the dash out and as much of the bulkhead aspossible... Water had been running down inside the bulk head, unfortunatly i have 1 piss wet thru ecu, and a sea of rust, must have been bad for years, nearly the entire bulkhead under the windscreen is gone, all under the scuttle panel. More welding needed! And need 2 wring my ecu out
|
![]() |
|
|