Blown rad

30psi · #1 28-05-2008, 12:56

What make rad was it?

lmrdave · #2 28-05-2008, 14:01

There was a group buy on SXOC for them.

Will have to have it out and see how it failed, and do a compression test to see if the HG did cause it. Will do that tomorrow night.

Hopefully it's repairable, should be looks like it gone on the weld between the 'header' and the matrix.

lmrdave · #3 18-06-2008, 10:16

Now fixed

(hopefully . . . not leaking yet)

Only explaination was that it either flicked a stone up in the fan, or more likely some heavy handed gorrilla dinged it on the fan when fitting it

lmrdave · #4 02-07-2008, 06:58

After having a look at it, I concluded the bonnet was touching it and forcing it slightly too much towards the fan. So I remounted it further down, but closer to the fan.

This was a bad idea!

Turns out the bonnet wasn't catching it, but the mount bracket I made

was flexing at speed and pushing the rad back.

So I had to fix the rad again (even bigger repair this time) and made new brackets for the rad and mounted the intercooler while I was at it. Removed the mechanical fan and mounted twin electric ones in there.

So there we go, no problems with the rads, just me being a muppet!