Yeah I did it a few years ago and worked out the parts that you need.
The only bit of the S13 shafts you can use is the driver side inner shaft (just the bit that goes in the diff) and the CV joint that bolts to this. You'll need the other side shaft but to look at because you need to grind a passenger side shaft end to be identical to this and then fit a snap ring. Then you need another passenger shaft to put on the drivers side with the S13 CV joint and inner shaft.
Do a search though this has been covered before and there's even diagrams on what to do
|
10-08-2008, 19:23
Hybrid Mode
