![]() |
|
#1
|
||||
|
||||
![]()
has anyone got a pic of an s12 hub and a z31 hub together ?
__________________
![]() |
#2
|
|||
|
|||
![]()
One interesting point is Z31 turbo and Z31 N/A don't appear to be inter-changeable. When I got my N/A arms we offered up N/A and turbo disks (parts that had been broken by the seller so of known origin). They were the same but the Turbo had deeper back spacing ie, if you lay them face-up, flat on the floor the Turbo was slightly taller.
__________________
![]() |
#3
|
||||
|
||||
![]()
could z31 turbo discs and calipers be fitted to the s12 hub though ?, i know i'd have to re drill them for 4 stud fitment, but would i need to space the caliper to centralize the disc ?
__________________
![]() |
#4
|
||||
|
||||
![]()
Yes, in theory you could but with the extra spacing for the rotor, it wouldnt work. Reason being, when trying to put on a wheel after putting the rotor on, there are virtually not threads on the lug studs and the caliper would not work due to different spacing of the bridge and the caliper itself needing to fit the extra width of the rotor. I'll get some better pics tomorrow.
|
#5
|
||||
|
||||
![]() Quote:
__________________
![]() |
#6
|
|||
|
|||
![]()
presume I need the Z31 specific caliper carriers, as well as the calipers themselves ?
__________________
![]() |
#7
|
||||
|
||||
![]()
I do not know to be honest but would not be surprised if the carriers are different. Just the calipers themselves are different.
|
![]() |
|
|