|
|
|
|
#1
13-01-2010, 02:22
|
||||
|
||||
If anyone has any spare time or is willing, if someone can take a picture of a headlamp setup after the grilles and the black surrounds are unbolted, that would be great. Just one would be fine. I want to see how much different the headlamp unit is to mine or if it's just the black surround that I'm looking at obtaining. Thanks.
|
|
#2
13-01-2010, 08:18
|
||||
|
||||
|
I figured since I had free time, I would take a part my spare headlamp unit so you can see and it would be easier for you to tell me what is different.
Here is the headlamp unit without the plastic covers on the sides the metal cover on the top. This would be the RH headlamp unit.   Note the key difference is that you have a black metal piece that the grilles bolt into. For us, we lack that but have a silver metal surrounding holding the headlamp into place. This is the metal surround by itself.  Then what it looks like for the headlamp unit without the metal surround holding the headlamp itself in place. With the metal piece off, you can easily pull the headlamp out and it is left with the metal housing.   Thank you for the help. Edit: Hey Umpkin, willing to sell/trade your headlight setup? I'll send you the metal pieces I have in addition. 
Last edited by Draconis; 13-01-2010 at 08:49.
|
|
#3
13-01-2010, 10:18
|
||||
|
||||
  sup, my lights are set up the same as yours drac, i'm making some grills but i'm returning back to the pop rivets on the main housing and replacing them with nuts n bolts the grilles welded to the nut then bolting them up. you can see the rivets on the first pic of your right side...got 1 nearly done...looks good.  hope the pics help. Last edited by chewingtobaco; 13-01-2010 at 11:19. Reason: add pic
|
|
#5
14-01-2010, 08:31
|
||||
|
||||
|
should look cool, will try to get 1 finnished so you can get a better look bud.
will get some pics with it out too.
|
|
#6
21-01-2010, 10:55
|
||||
|
||||
|
headlamp/ safari grilles
sup made some grilles for meh ride, kept the bars on the directional lines on the lens thats why the bottom 1 seems lower than normal.
just lobbed them on to take a few pics so still need a bit of fine tuning and my drivers side light sags due to rusted through fixings... they unbolt for access to lights. anyway, got more pics if you need them bud. 
Last edited by chewingtobaco; 21-01-2010 at 12:16. Reason: add tx
|
|
#7
22-01-2010, 09:15
|
||||
|
||||
|
 |
|
|
Hybrid Mode
