![]() |
|
#1
|
|||
|
|||
![]() Quote:
![]()
__________________
![]() |
#2
|
||||
|
||||
![]()
Thanks umpkin, read all the posts on the T25 and they are quite vague with regards what elbow fits, studs being different, use 3 of the 5 etc.
I'm fitting it with the S12 elbow unless there is a massive power difference in fitting the S13 or an aftermarket one (cutting the lug off the gearbox is not a problem if its needed) Great tip on the NISSAN FAST Software Last edited by paulsilv; 16-01-2010 at 17:32. |
#3
|
|||
|
|||
![]()
IMO the s12 elbow is less restrictive than the s13 one so better to use that. only ever use genuine gaskets. and it's bullshit about the parts system, all they need to know is the chassis designation (RS12/RS13) and engine code CA18T/DT
|
#4
|
||||
|
||||
![]()
Eventually ordered the 2 gaskets from Nissan in Doncaster. £9.39 for the Manifold Gasket, and £16 for the Elbow so saved a couple quid there LOL
![]() |
![]() |
|
|