Track / Tie rods S12/S13/S14

[lmrdave]

This for the 910 with standard wishbones?

Were they S14 ones?

Pretty certain they will fit into the rack.

Going to look into using S12 outers and S13 inners (with extra thread cut and cut down, sods law says I'll need thread where the flats are.

[30psi]

S12 outers and S13 inners will be very long.

Yeah I used S13/4 ones from tein which I believe are the same as R33 GTR. They're thicker and stronger. They needed shortening by about an inch