on the rollers

30psi · #1 18-03-2006, 00:03

Have you told Julian he can't spell Silvia?

Well done

PukkaSilvia · #2 18-03-2006, 19:02

Excellent Results and that max power figure isnt too far up in the rpm.

s13eater · #3 19-03-2006, 16:49

yeah, i'am wondering if timing the cam in will take it up the rev range, i'am a bit confused really cos piper told me that the std cam was 256/108 degrees, and the piper item was a 268/110 degrees, but i think martin said that std was 110 degrees and piper was 112 degrees, i ant got me manual here to check, can anyone check there manual if possible.

i'll ring piper again 2mz for the spec of there's.

30psi · #4 19-03-2006, 16:54

Adjusting the cam will only make a small difference. The pipe cam is set to 110 degs and the standard one is 112 degs

s13eater · #5 22-03-2006, 16:02

i suppose you have to try anything when your chasing those last few horses.

FLEXXX · #6 23-03-2006, 12:29

mad figures and all that from an 8 valver

nice job mate

rob turbo · #7 23-03-2006, 21:31

take it thats flywheel power....