rear coilovers

[s13eater]

Originally Posted by CamInHead

[pedant]they're not actually coilovers tho[/pedant]

*jogs on

ajustable spring platforms, but if they are no good then i may as well not post any info up about them then.

[paulsilv]

Post the info Shaun, this is good stuff, I;ve seen them in the flesh and they are spot on

[CamInHead]

Jost joshing there our Shaun

[s13eater]

the metal tube for the platform is 50mm high, by 4mm thick and about 90mm diameter, then just grind a circle for the top out of some 4mm plate, the threaded tube is from rally design's its about 100mm long and if you use a 9 inch spring, then you can get the stock hight of around 12 inch and you can adjust it down by about 2 1/2 inch.

[caz4244@essex]

thanks mate for that i rung rally designs today its about £100 to do it + p/p
what weigth are the springs ?? i would like hard ride as its a track car and low !!!
so not standard heigh

Originally Posted by s13eater

the metal tube for the platform is 50mm high, by 4mm thick and about 90mm diameter, then just grind a circle for the top out of some 4mm plate, the threaded tube is from rally design's its about 100mm long and if you use a 9 inch spring, then you can get the stock hight of around 12 inch and you can adjust it down by about 2 1/2 inch.

[s13eater]

they do them in all flavours matey, i used 315's on the front, then just checked the difference in the manuel between front and rear.

[paulsilv]

Originally Posted by s13eater

the metal tube for the platform is 50mm high, by 4mm thick and about 90mm diameter, then just grind a circle for the top out of some 4mm plate, the threaded tube is from rally design's its about 100mm long and if you use a 9 inch spring, then you can get the stock hight of around 12 inch and you can adjust it down by about 2 1/2 inch.

SOLD

I'll have 2 please