|
|
|
|
#1
17-09-2011, 06:47
|
|||
|
|||
Hi where about are you
have you tested the loom and checked your earths dose it just turn over or try to start 
|
|
#2
18-09-2011, 01:39
|
|||
|
|||
|
Have you tried to read the fault codes from the ecu?
|
|
#3
18-09-2011, 18:11
|
||||
|
||||
|
can you check power to the coil if you have power from it work forward or back if not
 a good mate told me this every problem has a solution: . cheers 
|
|
#4
20-09-2011, 12:08
|
||||
|
||||
|
hi just wounder hows the car going . have you check the crankshaft senor out not working no spark.
cheers.
|
|
#5
24-09-2011, 16:49
|
||||
|
||||
|
the dizzy loom must be faulty. the s12 dizzy has an internal cam angle sensor which picks up top dead sensor.Get your guys on it.look at the wiring diagrams on the pdf downloads
or firstly yourself, check the 12v feed to the DIZZY. manually add a supply from the battery. i bet the bastid starts.
__________________
 Quote:
Last edited by PukkaSilvia; 24-09-2011 at 16:58.
|
 |
|
|
Hybrid Mode
