what wires do i need to connect from the s12 harness?

[northerner]

If you get all three green relays with their wires attached, follow the S13 wiring diagram and work out what needs to be 12v permanent, 12v switched and negative etc. You can then identify the same on the 3 plugs by the S12 Maf. Have you worked out that you will also need to wire in a separate knock sensor wire as on the S12 its part of the engine loom, but not on the S13 one. I fed it from the connectors under the Maf round the slam panel and RH inner wing to the sensor.

[silviakid]

but i dont know what wires go on the relays as the diagrams of the relays on forums are different to the green relays im using, what wires i need to connect etc

[northerner]

to save yourself an awful lot of time and messing, go on sxoc and get the original relays. Its makes it so much easier

[silviakid]

have now bought some after market ones so i can follow the guide off clubs12.org

[northerner]

good stuff

[silviakid]

ye using the three green relays just doesnt work for me but at least i now have 3x spare green relays

[paulsilv]

http://nissansilvia.co.uk/vbb/showth...p?t=849&page=6