![]() |
|
#1
|
||||
|
||||
![]()
Ok so is there any company that does a big bore exhaust system for the S12 for reasonable cost or do most people make their own systems up?. I was hoping to get 200 bhp at the flywheel with std. engine except S13 turbo and a saab 9000 intercooler if this is possible?
|
#2
|
||||
|
||||
![]()
Any custom exhasut company like powerflow etc can make any exhaust fit any car, you rbest bet would be to find the nearest company near you and pop down with the car and tell them what you want.
As for fitting the T25 from the 200 sx, this is a good upgrade and will run a bar of boost ro redline happily along with a nice intercooler ( saab, volvo, cosworth ) the bigger the better mate. Im assuming your s12 is totally standard at present?
__________________
![]() Currently 226.4bhp@13psi with a remap to 18psi coming very soon ![]() |
#3
|
||||
|
||||
![]()
All standard except intercooler and turbo which is on it's way to Bradford to get reconned again.
![]() |
#4
|
||||
|
||||
![]()
I have just replied to your ecu question in the how to section
![]()
__________________
![]() Currently 226.4bhp@13psi with a remap to 18psi coming very soon ![]() |
![]() |
|
|