|
|
|
|
#1
07-03-2014, 20:20
|
||||
|
||||
hi big dave not to sure about your problem not that hot on wireing take a pic and i will check with mine cheers
|
|
#2
09-03-2014, 18:48
|
|||
|
|||
|
Thanks tim, the connector im referring to is this one:
 Im getting some proper wierd s**t now. p/s headlight comes on d/s never d/s side light always comes on p/s side light intermittent when stalk is in headlight on position can hear humming from wiper motor, when wipers turned on headlights keep going up and down. I've made a major co**up somewhere. Tim i'd appreciate it if you could tell me what goes onto that connector! Cheers guys
|
|
#3
09-03-2014, 18:49
|
|||
|
|||
|
Just thought i'd mention, i've opened up the stalk and it is operating ok, making proper contact, tested with a continuity tester
EDIT: Found it in the manual  
Last edited by bigdaves12; 09-03-2014 at 19:01.
|
|
#4
09-03-2014, 19:22
|
||||
|
||||
|
not sure bigdave that one near the battery connects to anything but will check on my tomorrow cheers
|
|
#5
10-03-2014, 18:49
|
|||
|
|||
|
An update. The diode near the alternator loom was gone, bridged that and now the headlamps stay on with ignition on. Other diodes are ok.
Cleaned and connected up all the grounding points, now the wipers work fine without disturbing the headlights. Still the headlights are playing up. Left lamp turns on when stalk is in second click position, no high bean when stalk is pulled back, main beam cuts out and no high beam. Right lamp shows no lights at all. Both diodes are ok. Any clues people? Tim mate any chance i can borrow your stalk? 
|
|
#6
10-03-2014, 19:24
|
||||
|
||||
|
will have to meet up to check the stalk soon let me no cheers
|
|
#7
14-03-2014, 10:41
|
|||
|
|||
|
Gonna give this another go this evening, does anyone know if there are any other copies of the service manual apart from the 1986 one everyone has? I'm convinced my wiring doesn't match up
|
 |
|
|
Hybrid Mode
