some pic's from JAE 06

rob turbo · #1 24-07-2006, 23:10

these figures will change for next year.

the first run (216 at the wheels) he only reved it to 5000rpm. i told him to rev it up to 7000rpm for the 2nd run. 240bhp at the wheels. 3rd run with nos. 294bhp at the wheels

gutted.

leaving the car to cook for 15 minuits before commencing, then only to find they DIDNT use a fan whilsed dyno'in was a big power sapping contributing factor. couldnt beleve it.! sucking in 34c temp without a cold air sorce.

madness.!

gunna go back to the drawing board & see what i can do for the next JAE.

want to re-create a bit also.

sideways danny · #2 24-07-2006, 23:51

Quote:

Originally Posted by rob turbo

leaving the car to cook for 15 minuits before commencing, then only to find they DIDNT use a fan whilsed dyno'in was a big power sapping contributing factor. couldnt beleve it.! sucking in 34c temp without a cold air sorce.

big fans aren't for cold air intake, they're for keeping the radiator cool and stopping the engine blowing up. temps would only have made a small difference to power

I saw a lot of other things in your bay which I think would be restricting power personally, I'd love to have a play with it and try a few things. if you want an accurate power figure you need to get over to Surrey rolling road. their Dyno-Dynamics is becoming the benchmark

CNHSS1 · #3 25-07-2006, 10:30

whats the engine spec as a matter of interest? ET or DET etc? boost level, turbo? good numbers

rob turbo · #4 25-07-2006, 22:23

what other things did you see that were 'restricting' power.. were did you see them..?

sideways danny · #5 25-07-2006, 23:18

Quote:

Originally Posted by rob turbo

what other things did you see that were 'restricting' power.. were did you see them..?

standard airflow meter, crappy breather setup, couple of dodgy bits I can't remmeber now but i saw them on the bay

s13eater · #6 26-07-2006, 22:11

anybody know who's RR it was

sideways danny · #7 26-07-2006, 23:40

Quote:

Originally Posted by s13eater

anybody know who's RR it was

Red Dot/Als junkyard/PowR

Rob - I didn't look at pictures, i looked at the car on the stand. plumbing the breathers into the intake is a bad thing, it will lower the octane of the fuel in the cylinder. what 300zx AFM? certainly not a z32.

rob turbo · #8 26-07-2006, 22:13

you will have been looking at old pictures. the breather is fed back into the air system, not to atmophere. + afm is NOT standard. its from a 300zx. there has been more work carried out nearly prior to the show also.

'dodgy & crapy'. not something i choose to complement someones hard work, own ideas, pride & joy. thanks.