some pic's from JAE 06

sideways danny · #1 24-07-2006, 23:51

Quote:

Originally Posted by rob turbo

leaving the car to cook for 15 minuits before commencing, then only to find they DIDNT use a fan whilsed dyno'in was a big power sapping contributing factor. couldnt beleve it.! sucking in 34c temp without a cold air sorce.

big fans aren't for cold air intake, they're for keeping the radiator cool and stopping the engine blowing up. temps would only have made a small difference to power

I saw a lot of other things in your bay which I think would be restricting power personally, I'd love to have a play with it and try a few things. if you want an accurate power figure you need to get over to Surrey rolling road. their Dyno-Dynamics is becoming the benchmark

CNHSS1 · #2 25-07-2006, 10:30

whats the engine spec as a matter of interest? ET or DET etc? boost level, turbo? good numbers

rob turbo · #3 25-07-2006, 22:23

what other things did you see that were 'restricting' power.. were did you see them..?

sideways danny · #4 25-07-2006, 23:18

Quote:

Originally Posted by rob turbo

what other things did you see that were 'restricting' power.. were did you see them..?

standard airflow meter, crappy breather setup, couple of dodgy bits I can't remmeber now but i saw them on the bay

s13eater · #5 26-07-2006, 22:11

anybody know who's RR it was

sideways danny · #6 26-07-2006, 23:40

Quote:

Originally Posted by s13eater

anybody know who's RR it was

Red Dot/Als junkyard/PowR

Rob - I didn't look at pictures, i looked at the car on the stand. plumbing the breathers into the intake is a bad thing, it will lower the octane of the fuel in the cylinder. what 300zx AFM? certainly not a z32.

rob turbo · #7 28-07-2006, 00:13

I take it you have the det lump instaled & running bigger power than mine, please tell me more on how poor my engine is please. & how i need to mod it to get to your spec

thanks.

rob turbo · #8 26-07-2006, 22:13

you will have been looking at old pictures. the breather is fed back into the air system, not to atmophere. + afm is NOT standard. its from a 300zx. there has been more work carried out nearly prior to the show also.

'dodgy & crapy'. not something i choose to complement someones hard work, own ideas, pride & joy. thanks.