#1
|
||||
|
||||
Wiring fault question
Any idea what is related to the injector postive signal on the s12-et loom. there is no pulse on the injector plug positive on crank over. Also nothing on the cold start injector plug. The negatives are constant with engine ignition off. is there a related sencor that if malfuntioning would cause this to stop working .
Ecu diagnostics show no problems. Apparently the car did not brake down, it just failed to start after being stood for 2 days
__________________
Quote:
|
#2
|
|||
|
|||
Correct me If I'm wrong but doesn't the CAS send the signal to the ECU to fire the Injectors at the correct moment just after TDC ?
__________________
|
#3
|
||||
|
||||
My car lives on I changed the ecu harness today and after several attempts and getting the timing correct its up and runnign sweet as Turns out a single wire( black and white ) Had corroded and broken off on the multiplug near the coil. i will post a picture up soon as so people know in future what to check for incase this problem pops up again in anycase.
Now to start planning a date for my 55k engine to be inserted haha
__________________
Currently 226.4bhp@13psi with a remap to 18psi coming very soon |
#4
|
||||
|
||||
glad to hear mate its a sh!t when ya pride and joy don't run,
__________________
fj20/et a replacement for displacement |
#5
|
||||
|
||||
Quote:
__________________
Quote:
|
#6
|
||||
|
||||
s12 feckin POWER, kicks ass.
__________________
fj20/et a replacement for displacement |
#7
|
||||
|
||||
Yeah was great and my car is running nicely although it sounds a bit tankish with the blowing downpipe etc, but this will all be changed in the next few weeks
__________________
Currently 226.4bhp@13psi with a remap to 18psi coming very soon |
|
|