Braided Oil hose for ca18et

andy s12 · #1 06-12-2006, 18:14

Hi all,
My oil feed for the turbo has split and I've decided to go for a braided hose, what I'm wondering is does anybody have a spare they would like to sell me or point me to a company who sells them. Also I have a scrapper S13 for bits would the braided hose from it fit ok as the blocks are similar.

In a bit of a bind so any help would be much appreciated.

Cheers

Andy

30psi · #2 06-12-2006, 19:00

Make sure you get the lump of metal that screws into the engine on the S13 and use this one. It comes out pointing to the turbo whereas the S12 one doesn't. Without it if you use an S13 hose you will find it very tight or maybe even too short

andy s12 · #3 06-12-2006, 19:18

Quote:

Originally Posted by 30psi

Make sure you get the lump of metal that screws into the engine on the S13 and use this one. It comes out pointing to the turbo whereas the S12 one doesn't. Without it if you use an S13 hose you will find it very tight or maybe even too short

cheers mate should of used that in the first place and not the make shift rubber fuel pipe

that was on the fooked t28 i changed for my t25 from my 200sx but didnt think that lump of metal came off doh.