Boost Gauge Problem

[s12Rob]

i think -20 is normal for vucum but dont hold me to it, where the hose goes onto the guage it that tight

[sideways danny]

18-20 inHg of vacuum is healthy

[Magoo]

when the car is being driven will I then see what boost it is kicking.

Its standard at the moment waiting for my T5 intercooler etc to be fitted.

Is standard around 6-7psi?

[s12Rob]

yes std is about that mark, once u have your ic fitted you may see 8 but then wind up up to 12psi and have some fun, have yo had air filter and exhaust yet?

if not they should be your next mod, the std exhaust is so restritive

[bigtim]

you will have to get rid of the standard safety valve before you wind the boost up though

[datdrift]

or you can just put a cable tie or two over the safety valve

[s12Rob]

why do that when a blanking plug will cost about 3 quid from b&q. you know its safe then, if your turn it up before you fit the ic, dont turn it up past 10psi. i learnt that lesson by melting a piston