![]() |
|
#1
|
||||
|
||||
![]()
from what i can remember the s12 discs are 274mm diameter x 22mm thick and the s14 discs are 280mm diameter x 30mm thick
|
#2
|
||||
|
||||
![]()
is the first pics s12 disc's
![]() ![]()
__________________
![]() |
#3
|
||||
|
||||
![]()
yea the first pic is an s12 disc. no sorry never took a pic of the discs side by side.... should have really
|
#4
|
||||
|
||||
![]()
so the machining is on the s12 hub, the outer bit, so the center of the s14 disc can slide over it ?
__________________
![]() |
#5
|
||||
|
||||
![]()
yea thats right
![]() |
#6
|
||||
|
||||
![]()
i wonder if they are the same as the z32 discs, i know the calipers are the same exept the z32's are ally and a lot lighter, i had a z32 disc for an example, but the bloody scrap man took it with a lot of scrap off the back yard
![]()
__________________
![]() |
#7
|
||||
|
||||
![]()
yea now that i have done the rear i have found out that the s14 use the same type of s12 hand brake mechanism, but as for the discs and callipers i have never looked into them.
|
![]() |
|
|