TPS trouble

alundra · #1 13-04-2008, 19:03

During the check ECU? Must i maintained the pedal at full throttle?

30psi · #2 13-04-2008, 19:45

Third terminal is only present on auto models for the kick down isn't it?

silviagod · #3 13-04-2008, 20:14

No, just press the pedal once then release it. On the auto the kickdown switch is under the accelerator pedal. The TPS on the auto has an extra plug underneath it.

I have seen the same TPS on the Nissan Sunny and that has all three contacts wired up.

Dr Silvia · #4 13-04-2008, 20:21

the pin that isnt used is for full open throttle, and the plug used for the auto is a variable output tps as used for all good engine management systems but all this is irrelevant

30psi · #5 13-04-2008, 23:25

SR20 auto's have the 3rd pin for kick down, thats all my question was based on...

alundra · #6 24-04-2008, 22:22

It works!
Just press the accelerator completly, hold it like 5/7 seconds during the check procedure! Really smoother now

.
Thanks guys