![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
HI,
We have checked for feed at injectors and found both terminals to be constantly live and not pulsing.....what gives them the signal to fire ? Stephanie |
#2
|
||||
|
||||
![]()
The ECU is what sends the signal out. Beyond that, I am sure these chaps would know better. I dont get how only a couple will be firing constantly while others wont when you trace the wiring back and they all feed off the same couple of wires from the ECU from my knowledge.
|
#3
|
|||
|
|||
![]()
i think they have an ignition live, and pulse the earth, im sure i read that on here somewhere.
**EDIT** according to the manual, thay have a permanent live, and the earth is pulsed, not ignition live. (but still the same in the end ![]()
__________________
![]() Last edited by umpkin; 14-12-2008 at 07:03. |
#4
|
|||
|
|||
![]()
that's a knackered ECU I recon
|
#5
|
||||
|
||||
![]()
Actually thats normal to see voltage at both terminals, as they're paired parallel, thats why there's 2 earth wires. If you unplug all the other injectors you will only see one terminal with voltage on each plug.
__________________
![]() |
![]() |
|
|