![]() |
|
#1
|
|||
|
|||
![]()
i heard the s13 one can be used but i could be wrong, i'm sure someone will correct me, or get the car running, if it runs with it take the connector off the afm, if it runs worse u know the afm is ok & the problom is somat else,
wher in ireland are u, my reli's are from mayo, off over there in march to watch the rally ireland mayo stages |
#2
|
||||
|
||||
![]()
s13 mafs are the same,cos i've been using 1 for the last 2 years.i dont know if thats whats causing my car to run badly on part throttle but maf's cause all sorts of running problems if they arent working right. my original 1 went wrong and caused the exact same problem so i'm guessing thats it.could be the fuel pressure reg though.i'm from dublin by the way.
|
#3
|
||||
|
||||
![]()
has anyone fitted a z32 maf onto a ca18et?i have 1 in perfect working order,with plug.
|
#4
|
|||
|
|||
![]()
Dont know anyone that's done it, but it's certainly possible with either an SAFC or a chip (in a mk2 ECU)
|
#5
|
|||
|
|||
![]()
Oh and just to confirm, s12 AFM is identical to a non lambda s13 AFM by the way.
|
#6
|
||||
|
||||
![]()
i once tried an old primera maf, and it ran but anything above 3k and it didnt want to play ball....
|
#7
|
|||
|
|||
![]()
vq map would have been very different
|
![]() |
|
|