Rear subframe camber correction

northerner · #1 23-04-2009, 19:31

So out with the old ......

northerner · #2 23-04-2009, 19:33

and in with the new......

northerner · #3 23-04-2009, 19:34

just got the trailing arms, ARB and brakes the finish tomorrow for the Mot which is due

CamInHead · #4 23-04-2009, 20:27

They look like MJP's Z31 bushes ?

Link

northerner · #5 25-04-2009, 15:31

Yep that they are !

Quote:

Originally Posted by CamInHead

They look like MJP's Z31 bushes ?

Link

northerner · #6 25-04-2009, 15:32

I cracked on today with refitting the trailing arms etc.
I bought some new inner bolts a while back so the camber can now be adjusted on the outter mounts. One thing I should have checked however was that they are the same diameter as the outter bolts ie were they fit in the trailing arms.
It was only when I offered them up I found out that the inner bolts dont go in the outter trailing arm bushes. The inner bolts have a diameter of 14mm --- The Outter bolts have a diameter of 13.4mm. After scratching my head for a while, I decided to use the none adjustable originals on the outter points for now and get the others milled down to size.

umpkin · #7 25-04-2009, 16:15

them Z31 ones are priced at 39.99 now.

are these a direct fit????