![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
You're best to get an LSD for an open S13 diff
__________________
![]() |
#2
|
||||
|
||||
![]()
i thought s13 & s14 diffs were pretty much the same?
|
#3
|
||||
|
||||
![]()
Yeah but I think the S14a has a thicker shaft (the splined part that goes in the diff unit)
__________________
![]() |
#4
|
||||
|
||||
![]()
do you think it'll be wise for me to get a spare s12 diff to try this with, don't wanna pull mine apart & be stuck
|
#5
|
||||
|
||||
![]()
Yeah I would. At the end of the day if you buy a diff that is designed to be installed in an S13 case that uses the S13 open type shafts you are likely to be fine
__________________
![]() |
#6
|
||||
|
||||
![]()
ok, so will a diff from any manual s13 do the job?
|
#7
|
||||
|
||||
![]()
No you need an old S12 diff. It's the S13 internals that you put in the S12 case
__________________
![]() |
#8
|
||||
|
||||
![]()
No,you need to get an lsd for an open diff s13.One thats designed to fit an s13 with vlsd will not fit .
http://www.nissansilvia.co.uk/vbb/at...2&d=1236110988 this is the picture of my lsd fitted into my diff casing. Last edited by irish s12; 23-03-2010 at 17:30. |
![]() |
|
|