![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
Yeah I would. At the end of the day if you buy a diff that is designed to be installed in an S13 case that uses the S13 open type shafts you are likely to be fine
__________________
![]() |
#2
|
||||
|
||||
![]()
ok, so will a diff from any manual s13 do the job?
|
#3
|
||||
|
||||
![]()
No you need an old S12 diff. It's the S13 internals that you put in the S12 case
__________________
![]() |
#4
|
||||
|
||||
![]()
No,you need to get an lsd for an open diff s13.One thats designed to fit an s13 with vlsd will not fit .
http://www.nissansilvia.co.uk/vbb/at...2&d=1236110988 this is the picture of my lsd fitted into my diff casing. Last edited by irish s12; 23-03-2010 at 18:30. |
#5
|
|||
|
|||
![]() |
#6
|
||||
|
||||
![]()
Yes,that is the diff I have in my car
You need to get the bearings that go on either side of it as well. |
#7
|
||||
|
||||
![]()
LSD
http://cgi.ebay.co.uk/Nissan-200SX-S...item4aa0b3eced NON-LSD http://cgi.ebay.co.uk/Nissan-200sx-S...item3ef9fbfb2d How do you visually check to see if its LSD or Not???????????? |
#8
|
|||
|
|||
![]()
Where did you get the bearings from? I'll be doing this as long as I can get all the bits together
![]() |
![]() |
|
|