Whats involved in fitting s13 injectors

[s13eater]

if i remember right, the standard injectors are 8mm and the s13's are 10mm.

[turbozx]

is the spacing the same for the s13 fuel rail?

[northerner]

try a search on www.club-s12.org/forums as loads of the US boys have done it with a safc-II

[wacomuk]

s13 injectors can be made to fit the standard rail. you can force the rubber connectors over the top of the injector (crude but it can be done)

its best to have a custom rail made

the s13 rail wont fit a Silvia (s13 have equal runners silvias don't)

if you have some way of controlling the injectors its prob best to use a adjustable fuel reg

you only need to add more fuel above 1bar of boost

[turbozx]

Cheers got a safc 2 now and all the bit like injectors, both fuel rails, so ill look at whats involved, cant be too hard! the safc looks pretty easy to wire in. what type of fuel pressure reg do i need?

[wacomuk]

iv used FSE fuel regs with out problems

[30psi]

I had to bin my FSE reg. It wouldn't maintain stable base pressure.

So you'd be driving along, have a boot and then it would remain on high pressure.