Rear subframe camber correction

CamInHead · #1 27-04-2009, 19:23

Do they have to be from Z31 Turbos btw ?

s13eater · #2 27-04-2009, 19:58

Quote:

Originally Posted by CamInHead

Do they have to be from Z31 Turbos btw ?

not sure mate, martin might know.

CamInHead · #3 27-04-2009, 20:06

Should be fairly clear when I get a look.

northerner · #4 29-04-2009, 17:36

Had 0.6mm machined off the diameter of the bolts today ready for the camber adjustment. I wasnt sure if the metal would cut but took off a small amount at a time

northerner · #5 01-05-2009, 12:46

I've now fitted the bolts. After I decide how to keep the front lowering springs in the strut/or go for an S13 setup, I will get the 4wheel alignment done

CamInHead · #6 01-05-2009, 19:53

Shame you're not local to me as I could do the alignment for free. Be interesting to see how it works out.

chris1986 · #7 30-09-2009, 12:37

hi guys

i was wondering how to get the rear subframe and the rear arms bushings out

how do you guys do it?

greetings, chris

northerner · #8 01-10-2009, 09:24

If you have the subframe off most just fall out through age. if not then you can just burn them out with heating!. There is a metal collar on the subframe which will also need to be chiselled out CAREFULLY!